Microfuge 20R, 120 V 60 Hz, with FA241.5P

B30146


Specifications

Platform Microfuge
Maximum Speed 15,000 rpm
Speed Control ± 50 rpm of set speed
Timed Run To 99 min, 59 sec in one second increments or continuous (∞)
Max Capacity Volume Range - 48 mL
Speed Display Actual rotor speed in 100 rpm increments or in RCF (when selected)
Temperature Range(s) From -10°C to +40°C in 1° increments
Installation Category II
Weight 32 kg / 70.6 lb
Width 31 cm / 12.2 in
Depth 66 cm / 26 in
Height 29.1 cm / 11.5 in
Clearances 30 cm (sides)
Humidity Restrictions <80% (non-condensing)
Power Requirements 120 VAC, 5.3 A, 60 Hz

Customers Also Viewed

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.